Frameset Column Formwork System

Frameset Column Formwork System comprises of 120×60 mm closed cross-sectional imported profiles of a special form. Frameset Column Formwork System’s resistance to the fresh concrete pressure is 80 kN/m2. Frameset Column Formwork System comprises of 120×60 mm closed cross-sectional imported profiles of a special form. Frameset Column Formwork System’s resistance to the fresh concrete pressure is 80 kN/m2. Frameset Column Formwork System Panels are manufactured automatically with robots. Panels are carried by Crane to ensure fast formwork circulation. Panels do not need assembly and they are ready to be used; without assembly preparation cost. Panels can be locked at every point, thanks to outer profile and connection clamp. Formwork assembly and disassembly labor is low. Column formworks in every desired dimension can be obtained by using standard panels in different widths and lengths horizontally and vertically. Panels can be interlocked with a single hammer blow, thanks to the special connection clamp. Cast steel corners facilitate disassembly of the panel and protects the panel against blows from, levers and sledgehammers during panel dissambly phase.

Ekoset Column Formwork System

EKOSET® Column formwork System with 50 kN/m2 fresh concrete compression resistance is the most economical column system which can be used for columns. Light enough to be carried easily by 2 persons, thanks to its max. 54 kg weight per panel, EKOSET® Column formwork System is an ideal product, designed for construction sites and applications which do not require a crane or with areas which are difficult to access. EKOSET® Column formwork System can be used for the production of both walls and columns. It ensures full safety with buttresses in different types and dimensions.

Woodset Wooden Girdered Column Formwork System

WOODSET® consists of 4 main components, namely plywood, wooden girder, adjustable column belt and adjustable corner bracket. WOODSET® is a flexible system which can be adapted for different projects and strengths. WOODSET® column formworks enable the casting of columns of diverse dimensions with the help of standard column walers. 115 cm, 145 cm, and 165 cm walers are created in the adjustable column system far the columns of dimensions between 30×30 / 70×70, 70×70 / 1 00xl 00, and 1 00xl 00 / 130xl 30 respectively. The resistance of column formwork of a maximum of 10 meters is 90 kN/m2 . System is designed by making static calculations for other dimensions. Other than the standard WOODSET®panel heights, it is possible to finish plywood installation at any low height and to create higher panels, using interim dimensions or H20-H20 connection components. Belts are produced automatically in gas robots.

Flexset Column Formwork System

FLEXSET® is a new generation aluminum panel formwork system which can be used as both columns and wall formwork system. Aluminum Panel Formwork Same Strength but Much Lighter; Although aluminum profiles have the same strength as steel, they weigh only 1/3 as much as steel. Thanks to their max. 56 kg weight per panel, it is a system that is light enough to be carried easily by 2 people. Therefore, it is the ideal solution for construction sites or applications which do not require a crane or have areas that are hard to reach. Aluminum Panel Formwork Longer Life; Use of aluminum materials instead of steel materials that are affected negatively by humidity, precipitation, etc. weather conditions and tend to rust, as a result, ensure a much longer life. Aluminum Panel Formwork Fast Product Delivery; Since the use of an aluminum profile does not require paint and galvanizing processes, fast product delivery is ensured. Aluminum Panel Formwork Environment Friendly; The aluminum materials that are used are 100% recyclable. Aluminum Panel Formwork provides ease of assembly; Panels are positioned directly on the load-bearing profile and any additional connection apparatus (bolts, pins-cotter pins, etc.) are not needed. Aluminum Panel Formwork Disassembly After Casting; Aluminum corner wedges facilitate disassembly of the panel and protect the panel against blows by levers, sledgehammers, etc. during the disassembly stage of panels. Aluminum Panel Formwork Flexible Application; The system where different heights and widths are produced with robots also provides solutions for all kinds of L-T-Z and angled intersections.

Modset Column Formwork System

MODSET Modular Formwork System is composed of plywood or steel surfaced panels. It is utilized as wall or column formwork in constructions like villa, residence, and infrastructures. It can be utilized together with MODSET-S Special Formwork System in every projects and every point of the project. In the MODSET panels with steel surface, high guality steel plate is used; which external frame is 5 mm, surface plate is 3 mm. External frame height is 60 mm. MODSET panels with plywood surface are composed of high quality, 11,5 kg/m2 weight, 18 mm thickness birch plywood which surface is with 200gr/m2 phenolic film. External support frame has 5 mm thickness and internal frame has 4 mm. External frame height is 70 mm.